Custom lcd displays, tft lcd modules, viewstream signage, lcd controllers

Touch Screen Accessories (for M3-100 & M3-200)

A full range of touch screen, membrane and mechanical buttons are offered for both the M3-100 and M3-200. Via the DV Studio utility program, touch events can be recognized and the files played according to the playlist instructions. Solutions offered include segmented 8 button touch screens, custom programmed analog touch screens and various membrane and button configurations.

• 4 Button Custom Membrane
• 8 Button Mechanical Switch
• 24 Button Serial Output
• 24 Button Custom Membrane

Audio (for M3-100 & M3-200)

Dual speaker kit to use the built-in 2 watt per channel stereo amplifier.
Dual Oval speakers with 4 pin connector & 300mm leads
needs IEC 405 style AC power cord ordered separately)

Volume control consisting of a 4.7 K ohm potentiometer on a 300mm lead that plugs into VR1 to provide manual adjustment of speaker volume. Note: Volume may also be controlled via content or button functions.

Programmable Analog Touch Controller (for M3-200)

The Analog Touch Controller enables standard resistive touch screens to be used with the M3-200 serial port. The controller is provided programmed for the number of buttons and the physical button layout as defined by the customer. Up to 16 touch points can be defined as event triggers or more if using the bar code input feature.

Light Sensors (for M3-200)

The light sensor accessories are available in 1 and 4 sensor models as standard (other configurations available as custom). Exposing any of the sensor to light creates an event trigger and the appropriate function in the playlist to be triggered.

Intelligent Motion Detector

The Intelligent Motion Detector can be custom programmed to vary the delay and actions of the motion trigger. It supports relay functions that can be used to on and off devices or audio streams etc.